Pleated-Flow Series Filter Cartridges
Each Pleated-Flow series filter cartridge is produced with a rigid center core which enhances structural strength of cartridge.
The cartidges are all polypropylene construction which provides wide chemical compatibility.
Pleated-Flow series filters ultilize proprietary filter media with fixed pore construction
to deliver highly consistent performance and resist dirt unloading at maximum differential pressure.
Besides, Pleated-Flow sereis filters have high surface area which provides long service life to reduce maintenance costs.
Manufactured in a class 10,000 clean room.
Flushed with 18 megohm-cm DI water (Optional).
Materials of Construction
Filter Media: Polypropylene
Sealing: Thermal Bond
Support Material: Polypropylene
Gaskets/ O-rings: Silicone, Buna-N, EPDM, Viton, Telfon Encapsulated Viton
Outside Diameter: 2.67'' (68mm)
Lengths: 10'', 20'', 30'', 40''
0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30, 100 µm
Maximum Operating Pressure: 75 psid (5.1 bar) @ 68°F (20°C)
40 psid (2.8 bar) @ 150°F (65°C)
Recommended Change Out Differential Pressure: 35 psid (2.4 bar)
FDA Listed Materials
Manufactured from materials which are FDA listed for food contact applications in title 21 of the U.S. code of federal regulations.
All Pleated-Flow filter cartridges are free of surfactants, anti-static agents, binders and adhesives.
All cartridge components meet USP-XXIII,Class V criteria.
Multiple autoclaving for 30 minutes at 250°F (121°C) under no end load conditions.
In-line steam sterilization is not recommended.
May be in-line sanitized with hot water at 180°F (82°C) for 1 hour.
Flow rate is per 10" cartridge. For liquids other than water, multiply the pressure drop by the fluid viscosity in centipoises.