Pleated-Flow CA Series Filter Cartridges
Each PLTCA series filter cartridge is produced with a continuous rigid center core which enhances structural strength of cartridge.
The cartridges are all polypropylene construction which provides wide chemical compatibility.
PLTCA series filters utilize proprietary filter media with fixed pore construction
to deliver highly consistent performance and resist dirt unloading at maximum differential pressure.
Besides, PLTCA series filters have high surface area which provides long service life to reduce maintenance costs.
Manufactured in a class 10,000 clean room.
Flushed with 18 megohm-cm DI water (Optional).
Materials of Construction
Filter Media: Polypropylene
Sealing: Thermal Bond
Support Material: Polypropylene
Gaskets/ O-rings: Silicone, Buna-N, EPDM, Viton, Telfon Encapsulated Viton
Outside Diameter: 2.67'' (68mm)
Lengths: 10'', 20'', 30'', 40''
0.5, 1, 2, 3, 5, 7, 12, 25, 30, 40, 70 µm Absolute
Maximum Operating Pressure: 75 psid (5.1 bar) @ 68°F (20°C)
40 psid (2.8 bar) @ 150°F (65°C)
Recommended Change Out Differential Pressure: 35 psid (2.4 bar)
FDA Listed Materials
Manufactured from materials which are FDA listed for food contact applications in title 21 of the U.S. code of federal regulations.
All Pleated-Flow CA filter cartridges are free of surfactants, anti-static agents, binders and adhesives.
All cartridge components meet USP-XXIII,Class V criteria.
Multiple autoclaving for 30 minutes at 250°F (121°C) under no end load conditions.
In-line steam sterilization is not recommended.
May be in-line sanitized with hot water at 180°F (82°C) for 1 hour.